Get Best world class Brands of
#User Capacity : 30000
#Event Buffer : 100000
#CPU : 32bit MIPS CPU
#RAM : 32MB
#Flash Memory : 128 MB
#Power/Current : DC 9.6V-14.4V
#Rated Max. : 1A
#Floor Button Control Relays : 10 , Fingerprint Capacity 3,000 Proximity Card Capacity 30,000, Event Capacity 1,00,000.
#Control floors : 20 floors, Card qty supported : 20,000 cards , Storage: 100,000 records (records kept even power off), Communication method : TCP/IP.
#RS-485 communication with the master elevator controller Connectable with up to 16 relays to control the floor buttons in the elevator.
#Three types of relays are supported: Button Relay, Call Elevator Relay and Auto Button Relay DIP switch settings for device address and relay types. Supports 3 relay types: Call Elevator, Button, and Auto Button).
#Compact Design Supports RS485 Communication Controls Additional Accessories Supports 2 Wiegand Readers Easy Installation.
#KF1000 series is the innovative visible light facial recognition reader dedicated to InBio series biometric controller to adopt facial recognition technology, offering one of the fastest, most stable, most accurate facial recognition experiences in the industry.
#Sensor: Z-ID+ Sensor. Single gang Standard junction box installation. RS485 Communication Interface. Stainless Steel Front casing. •
#Protection level of IP65; fully dust tight and resistant to water splashes from any direction.
#Flush-Mounted Design for neat installation.
#Wiegand Card Readers 125kHz EM or 13.56MHz IC card reader Wiegand interface
#This product consists of two parts: Wireless reader and data receiving module which are using 433MHz frequency for data transmission.
#The reader can read 13.56MHz IC card’s UID then send the data by 433MHz to the receiving module and finally send it to the terminal via Wiegand interface.
#The wireless communication is under high-security data encryption.
#C-332 Two doors access control board adopts 32-bit core processor combined with mass FLASH memory development and design, realizing LAN and WAN communication network, which can be used in banks, communities, schools, enterprises and other places.
#The EC10 Elevator control panel can restrict access up to ten floors.
#The EX16 Elevator floor extension board restricts access up to an additional sixteen floors.
#Each EC10 can support up to three EX16 boards.
#When combining together, a total fifty eight (58) floors can be controlled with a single EC10 bundle.
#Note EC10 panels can be daisy-chained together to control as many floors as desired.
#Number of Door : 1 Door , Card Holders Capacity : 30000, Log Events Capacity : 100000, Communication : TCP/IP and RS-485.
#Number of doors controller : 2 Door, Card holders Capacity 30000, Fingerprint Capacity 3000, Log Events Capacity : 100000.
#Card Capacity : 20,000, Event buffer : 1,00,000, Communication : TCP/IP 10M/100M adaptive, Function Description Control 2 doors, enter via cards swiping and exit via buttons, or both enter & exit via cards swiping , PCB board size : 21.9 * 12.2 * 3.4cm.
#32-bit high-speed processor TCP/IP network communication, with the self-adapt network interface.
#The communication data is encrypted to ensure information security.
#The recognized storage of card numbers with a maximum of 20 digits.
#Massive storage with 100,000 (can be expended to 200,000) cards information and 300,000 (can be expended to 600,000) access control events.
#RS-485 communication with the master elevator controller Connectable with up to 16 relays to control the floor buttons in the elevator.
#Three types of relays are supported: Button Relay, Call Elevator Relay and Auto Button Relay DIP switch settings for device address and relay types. Supports 3 relay types: Call Elevator, Button.
#State-of-the-art 1, 2 and 4 door biometric access control panels with built-in Web Application eliminate the need for management software.
#FR1200, a fingerprint reader with RS485 communication interface works with biometric access controllers and fingerprint standalone access control, including inBIO series controllers, F8 and so on. It offers the function of capturing and transferring fingerprint samples to access control panel.
#With its IP65 rated rugged structure, FR1200 offers extra durability in all weather conditions including outdoor.
#Wiegand Card Readers 125kHz EM or 13.56MHz IC card reader Wiegand interface.
#C24 four door access control board is a new generation of intelligent network access control products.
#It uses super network processor and mass memory to realize real network data exchange, high-speed data operation and super large user data management.
#Number of Door : 2 Door , Card Holders Capacity : 30000, Log Events Capacity : 100000, Communication : TCP/IP and RS-48.
#CPU : 32bit MIPS CPU, RAM : 32MB, Flash Memory 128 MB, Fingerprint Capacity 3000,Card Capacity : 30000, Event buffer : 100000.
#Card Capacity : 20,000,
Event buffer : 1,00,000, Communication : TCP/IP 10M/100M adaptive, Function Description : Control 4 doors, enter via cards swiping and exit via buttons , PCB board size : 21.9 * 12.2 * 3.4cm.
#32 bit ARM processor, support for 5 channels simultaneous communication (support 5 operators simultaneously operate) Bistable state, swipe card the door normally open, swipe again the door normally close Remote open door,full card to open door read card inside and outside to open door Running stable monitoring(voltage input,watch dog,operating days).
#InBio Pro Series is a project oriented high-end product line with unique features such as embedded fingerprint verification and advanced access control functions, which can be managed by TCP/IP communication thru LAN or WAN networks.
#State-of-the-art 1, 2 and 4 door access control panels with built-in Web Application eliminate the need for management software
#MR1010 and MR1020 are advanced access control readers with 125kHz & 13.56MHz RFID technology, respectively.
#It’s an ideal choice for high-security appliacations.
#They are attractively designed to withstand harsh environments to operate outside (IP66) and to offer a high vandal proof resistance (IK10).
#C22 four door access control board is a new generation of intelligent network access control products.
#It uses super network processor and mass memory to realize real network data exchange, high-speed data operation and super large user data management.
#C-334 four doors access control board can manage four doors, support 156,000 users data, 250,000 event logs ( card reading, alarm, exit button, door sensor, OS), provides six relay outputs (four lock relays, two alarm relays),eight exit button input ports, four door sensor input ports, eight WG26/34 card reader input ports, two RS485 and one TCP/IP communication ports.
#Support operating voltage DC9V to 14V, working current
<280mA.
#32-bit high-speed processor Support RS485 and Wiegand(w26, w34) protocol Supports reading EM card No.
#Tamper proof function Built-in buzzer for status indication 30mm-100mm induction distance High Speed Processor of 320MHz.
#3.5 Inch Touch Screen TFT Color LCD with 320×240 Virtual Keypad on LCD Linuxc OS (RTOS)512 MB RAM , 256MB Flash
#TF1700 is one of the world’s smallest Ethernet connection-based fingerprint terminals, used for access control and time attendance features, with IP65 waterproof housing.
#With its IP65 rated rugged waterproof and dustproof structure, TF1700 offers extra durability in harsh conditions such as outdoor environments.
#Backlight Keypad Wiegand 26 Input and Output Capacity : 2,000 users Can set relay toggle mode Three Accesses, Card only, Card + PIN, Card or PIN Mobile APP.
#TF30R support card unlock, fingerprint unlock, and card & fingerprint unlock The card reading frequency is 13.56MHZ and card reading distance is 1cm–3cm It support both RS-485 protocol and Wiegand protocol.
#Fingerprint Capacity: 3, 000 Support duress alarm, tamper alarm, intrusion alarm, door contact timeout alarm, and illegal card exceeding time alarm.
#Support 30,000 valid cards & 150,000 records Support multiple cards(default IC card) (“-D” means ID EM card) Wiegand or RS-485 interface to reader Door time out alarm, intrusion alarm, duress alarm and tamper alarm Anti-passback, multi-card open Support 128 efficient time and holiday schedules Watch dog function ensure device free from halting
#RS485 is currently a widely used communication interface in data acquisition and control applications where multiple nodes communicate with each other.
#RS485 is also the most versatile communcation standard in the standard series defined by the EIA.
#Watchdog is designed for repairing itself in case that exception occurs, to ensure the long service life of the reader.
#Service life of the reader Wiegand(w26, w34) protocol Built-in buzzer for idenƟfying the reading status IP65 Standard Capacity of card reading is 2000 users.
#32-bit high-speed processor Support RS485 and Wiegand(w26, w34) protocol Supports reading EM card No.
#Tamper proof function Built-in buzzer for status indication Meets the standard of ISO 11784/11785 and the card reading frequency is 125KHz.
#The number of ID cards can be read (ULtraACR802E).
#EM Card
#Personal Identity Number
#Access Control
#WG26/WG34 Adjustable by end user under reader mode.
#Capacity : 2000 users, Button Keypad Plastic Case, Indoor Used.
#Access Way : PIN, Card, PIN + Card Relay Toggle Mode Master cards are available Data Backup.
#TW-AER81 is a smart QR code reader with ID card verification.
#It has indicator light- Red working light, Green feedback light, Light green network night Supports QR code on paper and mobile phone Supportive interface Wiegand.
#RS485,RS232 Quick reading speed of <200ms Available in material of PC Material, Reading Window, Tempered Glass.
Don’t miss our future updates! Get Subscribed Today!
©2024. All Rights Reserved. Site Powered By Team DGM [ ARC GROUPS ]